Back to Iowa

HF731 • 2026

A bill for an act relating to mold remediation.

A bill for an act relating to mold remediation.

Passed Legislature

This bill passed both chambers and reached final enrollment, even if later executive action is not shown here.

Sponsor
HAYES
Last action
2025-03-04
Official status
Introduced, referred to Health and Human Services. H.J. 492 .
Effective date
Not listed

Plain English Breakdown

Using official source text because the generated explanation was unavailable or could not be confirmed against the official bill text.

A bill for an act relating to mold remediation.

A bill for an act relating to mold remediation.

What This Bill Does

  • A bill for an act relating to mold remediation.

Limits and Unknowns

  • This entry is temporarily using official source text because the generated explanation could not be confirmed against the official bill text during the last sync.

Bill History

  1. 2025-03-04 Iowa Legislature

    Introduced, referred to Health and Human Services. H.J. 492 .

Official Summary Text

A bill for an act relating to mold remediation.

Current Bill Text

Read the full stored bill text
House

File

731

-

Introduced

HOUSE

FILE

731

BY

HAYES

A

BILL

FOR

An

Act

relating

to

mold

remediation.

1

BE

IT

ENACTED

BY

THE

GENERAL

ASSEMBLY

OF

THE

STATE

OF

IOWA:

2

TLSB

2575YH

(3)

91

dg/ko

H.F.

731

Section

1.

NEW

SECTION

.

136E.1

Definitions.

1

For

purposes

of

this

chapter,

unless

the

context

otherwise

2

requires:

3

1.

“Department”

means

the

department

of

health

and

human

4

services.

5

2.

“Direct

supervisor”

means

an

individual

who

is

physically

6

present

during

on-site

mold

remediation

and

is

immediately

7

available

to

direct,

instruct,

and

oversee

the

activities

of

8

other

individuals.

9

3.

“Mold”

means

any

form

of

multicellular

fungi

often

10

found

in

water-damaged

indoor

environments

and

building

11

materials,

and

including

cladosporium,

penicillium,

alternaria,

12

aspergillus,

fusarium,

trichoderma,

memnoniella,

mucor,

and

13

stachybotrys

chartarum.

14

4.

“Third-party

certification”

means

a

mold

remediation

15

certification

offered

by

any

of

the

following:

16

(1)

The

institute

of

inspection

cleaning

and

restoration

17

certification.

18

(2)

The

national

organization

of

remediators

and

microbial

19

inspectors.

20

(3)

An

organization,

approved

by

the

department

of

21

inspections,

appeals,

and

licensing

by

rule,

that

has

standards

22

related

to

mold

remediation

similar

to

the

entities

in

23

subparagraphs

(1)

and

(2).

24

Sec.

2.

NEW

SECTION

.

136E.2

Mold

remediation.

25

1.

A

person

shall

not

perform

mold

remediation

unless

26

the

person’s

process

for

mold

remediation

complies

with

the

27

ANSI/IICRC

S520

standard

for

professional

mold

remediation,

28

or

a

similar

standard

as

identified

by

the

department

of

29

inspections,

appeals,

and

licensing.

30

2.

The

department

of

inspections,

appeals,

and

licensing

31

shall

establish

a

registry

for

entities

that

provide

mold

32

remediation

services.

An

entity

applying

to

register

in

the

33

registry

shall

be

required

to

provide

proof

that

a

direct

34

supervisor

employed

by

the

entity

holds

a

current

third-party

35

-1-

LSB

2575YH

(3)

91

dg/ko

1/

4

H.F.

731

certification.

1

3.

The

department

of

inspections,

appeals,

and

licensing

2

shall

adopt

rules

pursuant

to

chapter

17A

to

implement

this

3

section,

including

but

not

limited

to

rules

that

allow

the

4

department

to

access

the

registry

established

in

subsection

5

2

for

the

purpose

of

performing

the

department’s

duties

in

6

section

136E.3.

7

Sec.

3.

NEW

SECTION

.

136E.3

Mold

——

public

awareness

8

campaign.

9

1.

The

department

shall,

in

consultation

with

appropriate

10

agencies

and

organizations,

establish

a

mold

public

awareness

11

campaign

to

assist

the

public

in

understanding

the

threat

of

12

mold

in

indoor

environments,

and

the

importance

of

removing

13

mold.

As

part

of

the

program,

the

department

shall

do

all

of

14

the

following:

15

a.

Disseminate

information

to

the

public

via

brochures

16

and

the

department’s

internet

site

relating

to

the

treatment

17

of

mold

in

indoor

environments

and

the

importance

of

removing

18

mold.

19

b.

Provide

the

public

with

contact

information

for

20

organizations

or

government

agencies

that

can

provide

21

information

pertaining

to

the

health

effects

of

mold,

mold

22

testing

methods,

or

accredited

industry

standards

for

the

23

remediation

of

mold.

24

c.

Once

every

five

years,

collaborate

with

the

department

25

of

inspections,

appeals,

and

licensing

to

review

technology

26

and

treatment

techniques

for

mold

remediation

that

provide

27

additional

protections

for

public

health

and

safety.

28

2.

On

or

before

January

31

of

each

year,

the

department

29

shall

submit

a

report

to

the

general

assembly

concerning

all

30

of

the

following:

31

a.

New

scientific

evidence

concerning

health

effects

32

associated

with

mold,

or

water

damage,

in

indoor

environments,

33

including

the

effects

on

air

quality

standards.

34

b.

Changes

in

state

and

federal

law

that

establish

standards

35

-2-

LSB

2575YH

(3)

91

dg/ko

2/

4

H.F.

731

for

training,

certifying,

or

licensing

persons

providing

mold

1

remediation

services

in

residential,

public,

or

commercial

2

buildings.

3

3.

The

department

shall

adopt

rules

pursuant

to

chapter

17A

4

to

implement

this

section.

5

EXPLANATION

6

The

inclusion

of

this

explanation

does

not

constitute

agreement

with

7

the

explanation’s

substance

by

the

members

of

the

general

assembly.

8

This

bill

relates

to

mold

remediation.

9

The

bill

defines

“direct

supervisor”

as

an

individual

who

10

is

physically

present

during

on-site

mold

remediation

and

is

11

immediately

available

to

direct,

instruct,

and

oversee

the

12

activities

of

other

individuals.

13

The

bill

defines

“mold”

as

any

form

of

multicellular

fungi

14

often

found

in

water-damaged

indoor

environments

and

building

15

materials.

16

The

bill

defines

“third-party

certification”

as

a

mold

17

remediation

certification

offered

by

the

institute

of

18

inspection

cleaning

and

restoration

certification;

the

national

19

organization

of

remediators

and

microbial

inspectors;

or

an

20

organization

with

similar

standards

that

has

been

approved

by

21

the

department

of

inspections,

appeals,

and

licensing

(DIAL)

22

by

rule.

23

The

bill

prohibits

a

person

from

performing

mold

remediation

24

unless

the

mold

remediation

complies

with

the

ANSI/IICRC

S520

25

standard

for

professional

mold

remediation,

or

a

similar

26

standard

as

identified

by

DIAL.

27

The

bill

requires

DIAL

to

establish

a

registry

for

entities

28

that

provide

mold

remediation

services.

An

entity

applying

29

to

register

in

the

registry

must

provide

proof

that

a

direct

30

supervisor

employed

by

the

entity

holds

a

current

third-party

31

certification.

The

bill

requires

DIAL

to

adopt

rules

to

32

implement

the

bill,

and

to

provide

the

department

of

health

and

33

human

services

(HHS)

access

to

the

registry

for

the

purpose

34

of

carrying

out

duties

related

to

the

mold

public

awareness

35

-3-

LSB

2575YH

(3)

91

dg/ko

3/

4

H.F.

731

campaign

(campaign).

1

The

bill

requires

HHS,

in

consultation

with

appropriate

2

agencies

and

organizations,

to

establish

a

campaign

to

assist

3

the

public

in

understanding

the

threat

of

mold

in

indoor

4

environments,

and

the

importance

of

removing

mold.

The

bill

5

details

actions

HHS

must

take

as

part

of

the

program.

6

The

bill

requires

HHS,

on

or

before

January

31

of

each

year,

7

to

submit

a

report

to

the

general

assembly

that

includes

new

8

scientific

evidence

concerning

health

effects

associated

with

9

mold

or

water

damage

in

indoor

environments,

including

the

10

effects

on

air

quality

standards,

and

changes

in

state

and

11

federal

law

that

establish

standards

for

training,

certifying,

12

or

licensing

persons

providing

mold

remediation

services

in

13

residential,

public,

or

commercial

buildings.

14

-4-

LSB

2575YH

(3)

91

dg/ko

4/

4